Changing the Enterprise Server’s IP Address
To change the IP addresses on the Enterprise Redundant server, see Assigning Static IP Addresses.
Other Related Topics...
The FaxPress Enterprise’s IP address can be set or changed five ways:
|
■
|
from the front panel’s LCD window. |
|
■
|
by attaching a monitor, mouse, and keyboard directly to the Enterprise, logging in as administrator with password castelle, all lower case, and then setting the IP address the same way you’d change a Windows 2000 workstation’s IP address. (Start>Settings>Control Panel>Network and Dial-up Connections> Local Area Connection>Properties>Internet Protocol (TCP/IP)>Properties) |
|
■
|
through FaxPress Plus, the Enterprise client’s Windows-based administration fax transaction and administration utility. The FaxPress Plus client software must be installed. See Using the System Information Functions for details. |
Changing the IP Address Using the LCD Window (Models with 4-key Keypad)
To enter a new IP address using the Enterprise’s front panel LCD window, follow these steps:
|
1.
|
Confirm the LCD window currently displays the Enterprise name and IP address.
|
|
2.
|
Press the Esc button to move from the FaxPress name and IP address display to a window displaying the Enterprise’s IP address only.
|
|
3.
|
With the FaxPress Enterprise’s IP address displayed, press the Up arrow button to scroll through the available digits. A dot will also be displayed.
|
|
4.
|
Select the first digit.
|
|
5.
|
Once you’ve selected the first digit, press Enter to move the cursor to the next digit. Repeat until the correct address is entered
|
If Esc is mistakenly pressed while the new IP address is being entered, press Esc again to return to the initial FaxPress Enterprise name and IP address display.
|
6.
|
Enter the dots between the subnets the same way you entered the numbers.
|
|
7.
|
After specifying the last digit, press Enter; press Enter again.
|
|
8.
|
The Accept? screen requires you to either press Esc to return to the original IP address, or Enter to confirm the new IP address.
|
Changing the IP Address Using the LCD Window (Models with 5-key Keypad)
To enter a new IP address using the Enterprise’s front panel LCD window, follow these steps:
|
1.
|
Confirm the LCD window currently displays the Enterprise name and IP address. |
|
2.
|
Press Enter to enter the ENTER IP ADDRESS screen.
|
|
3.
|
Press Up/Down arrows to scroll through 0-9 and DOT. |
|
4.
|
Press Enter to confirm the digit and to move the cursor to the right and the next digit. |
|
5.
|
Press Enter twice to confirm IP ADDRESS.
|
|
6.
|
The LCD screen will display ACCEPT? (ESC/Oth) and the IP ADDRESS you entered.
Press Enter to accept the displayed IP ADDRESS. If you need to change the IP ADDRESS, press any of the four directional keys to re-enter the IP ADDRESS.
|
After pressing Enter, the Enterprise might take 5-10 seconds to update its IP adress on the network.
|
7.
|
The Accept? screen requires you to either press any of the four directional keys to return to the original IP address or Enter to confirm the new IP address. |
FaxPress Enterprise & Enterprise Redundant WebHelp
Last Updated: 11/1/2007
E-mail this page
|
Castelle
855 Jarvis Drive, Suite 100
Morgan Hill, CA 95037
Toll-free 800.289.7555
Tel 408.852.8000
Fax 408.852.8100
www.castelle.com
|